Custom Thermal Processing Equipment
Industrial Ovens Designed for Manufacturing Performance
Blasdel manufactures custom industrial ovens for a wide range of thermal processing applications. Each oven is engineered to meet specific production requirements, including temperature uniformity, throughput, part size, and facility constraints.
Heating methods include electric infrared or gas infrared, selected based on process efficiency, operating cost, and performance goals.
Industrial Oven Applications
- Curing and post-cure processing
- Drying
- Preheating and thermal conditioning to bring materials to a controlled, uniform temperature prior to downstream processing.
- Finishing and coating
Design Capabilities
- Batch and Conveyorized Ovens
- Multi-Zone Temperature Control
- Heat Distribution
- Material Handling Integration
- Conveyors – horizontal and overhead
- Part loaders
- UL 508A control panels
Control & Monitoring Options
- PLC-based control systems and temperature controllers, UL 508A control panels
- Touchscreen HMI interfaces
- Recipe-based process control
- Data logging and process validation
- Remote monitoring options
Discuss Your Industrial Oven Requirements
Industrial Ovens — Technical Specifications
Industrial Ovens
| Parameter | Specification Range |
|---|---|
| Operating Temperature | Ambient to 1700 F. |
| Heating Technologies | Electric infrared, Gas catalytic infrared, electric high volume air |
| Oven Type | Batch or continuous |
| Airflow Design | Horizontal, vertical, or custom for Hy-Vol ovens |
| Temperature Uniformity | Engineered per application requirements |
| Control System | PLC with touchscreen HMI – and temperature controllers. Motor starters or VFDs for Hy-Vol ovens. UL 508A control panels. |
| Construction | Heavy-duty insulated panel or structural steel for Hy-Vol ovens |
| Insulation | High-efficiency minerals |
| Exhaust & Ventilation | Application-specific design to meet NFPA standards. Eliminates VOC’s that may be present. |
| Compliance | Designed to applicable industry standards – NFPA, UL 508A |
Request a Technical Review of Your Process
Testing Lab
Prior to the production phase, testing is conducted at our full-scale production TESTING LAB. Process testing utilizes one or more of our industrial ovens in our facility. These ovens are all equipped with medium wave emitters. (High volume air test ovens not equipped with IR emitters.) Some options are electric infrared ceramic panels, Coil-O-Rods or ceramic generators as well as gas catalytic infrared and high-volume air/convection ovens. High density V-Series heaters are also available for small parts testing. Correct selection of the proper emitter for your process, eliminates potential problems in the future.
Above all, Blasdel knows that testing prior to design is imperative. It helps to ensure efficient results after installation in your facility. THESE RESULTS INCLUDE DATAPAQ REPORTS WITH TIME AND TEMPERATURE RESULTS, PICTURES AND ANALYSIS OF RESULTS. SAMPLE ATTACHED SEPARATELY. Potential customers may lease small test sets on a monthly basis for their own research purposes as well. We will then work with the customer to not only help them evaluate their test results as well as learn from them for a better understanding of the design needed to achieve their improved production goals. Reading the “What is Infrared Energy” technical manual linked below also helps to provide a better and more thorough understanding of how our Infrared industrial ovens will help with meeting production objectives.
Built to Fit Your Facility
Blasdel industrial ovens are designed to integrate seamlessly with existing production layouts, utilities, and safety requirements. Each system is built for long-term reliability and consistent thermal performance.
